ESA Intended Invitations To Tender

Technology Developme
Total items: 95

1 15.1EC.04 ON-BOARD SYSTEM IDENTIFICATION FOR UNCERTAINTY MODELLING AND CHARACTERIZATION. (PTRP) - EXPRO PLUS ( INTENDED)
2 17.1EC.03 ADVANCED COLLOCATED ACTIVE CONTROL OF LARGE ANTENNA STRUCTURES - EXPRO PLUS ( EVALUATION)
3 17.1EC.04 GNC PRELIMINARY DESIGN FOR RENDEZVOUS AND DOCKING IN NRO ORBITS AROUND THE MOON ( COMPLETED)
4 18.1EC.02 ENHANCED TECHNIQUES FOR AOCS GNC FUNCTIONAL VERIFICATION ( ISSUED)
5 18.1EC.03 BREADBOARD OF A MULTI-SPECTRAL CAMERA FOR RENDEZVOUS IN LAGRANGIAN ORBITS OF THE EARTH-MOON SYSTEM ( ISSUED)
6 18.1EC.04 APS DETECTORS FOR VISION-BASED NAVIGATION SYSTEMS ( ISSUED)
7 18.1EC.05 ROBUST ATTITUDE GUIDANCE AND CONTROL FOR FLEXIBLE SPACECRAFT - EXPRO PLUS (RE-ISSUE) ( ISSUED)
8 16.1ED.03 SPACEWIRE NETWORK MANAGEMENT SERVICE SUITE DEFINITION AND VALIDATION (PTRP) - EXPRO PLUS ( INTENDED)
9 17.1ED.02 ARM BASED MCU ( COMPLETED)
10 17.1ED.03 ASSESSMENT OF AUTOMOTIVE EEE COMPONENTS SUITABILITY FOR SPACE APPLICATIONS - EXPRO+ ( ISSUED)
11 18.1ED.01 PROTOTYPING AND CHARACTERISATION OF A MONOLITHIC, RAD-HARD, VOLTAGE CLAMP INTEGRATED CIRCUIT - EXPRO PLUS ( ISSUED)
12 18.1ED.02 SMD ISOLATOR DEVELOPMENT - EXPRO PLUS (RE-ISSUE) ( ISSUED)
13 18.1ED.03 RF SAFE OPERATING AREA EVALUATION AND IDENTIFICATION OF A RELIABILITY TESTING METHODOLOGY FOR MILLIMETER-WAVE PROCESSES - EXPRO PLUS ( ISSUED)
14 18.1ED.04 INVESTIGATION OF ADDITIVE MANUFACTURING OF IMPROVED CERAMIC PACKAGES FOR DETECTORS - EXPRO PLUS ( INTENDED)
15 18.1ED.05 PROTOTYPING AND CHARACTERIZATION OF OPTICAL ISOLATORS FOR VISIBLE WAVELENGTHS - EXPRO PLUS ( INTENDED)
16 18.1ED.06 FPGA ACCELERATED DSP PAYLOAD DATA PROCESSOR BOARD ( ISSUED)
17 18.1ED.07 MINIATURIZED DSP / PROCESSOR BOARD FOR SCIENCE AND ROBOTIC EXPLORATION USING BARE-DIE-ON-PCB MOUNTING TECHNOLOGY- EXPRO+ ( INTENDED)
18 18.1EP.02 RADIATION HAZARDS AND SCENARIOS SYSTEM FOR HUMAN SPACEFLIGHT - EXPRO PLUS ( INTENDED)
19 18.1EP.03 MINI ION EMITTER FOR SPACECRAFT POTENTIAL MITIGATION ON SCIENCE MISSIONS - EXPRO PLUS ( ISSUED)
20 18.1EP.05 PROBABILITY OF LATENT FAILURES CAUSED BY ELECTRO-STATIC DISCHARGE (ESD) TESTING ( INTENDED)
21 17.1ET.04 FEASIBILITY STUDY INTO MULTIBEAM WIDE SWATH ALTIMETRY ( INTENDED)
22 17.1ET.09 KA BAND MULTIBEAM RECONFIGURABLE PHASED ARRAY ANTENNA FOR FUTURE EXPLORATION MISSIONS ( ISSUED)
23 17.1ET.10 HYBRIDIZING GNSS, INTEGRATED SENSORS AND TERRESTRIAL POSITIONING SIGNALS FOR SEAMLESS NAVIGATION OF GROUND BASED USERS - EXPRO+ ( INTENDED)
24 17.1ET.11 RECEIVER TECHNIQUES FOR FUTURE MASS MARKET LOCALISATION NEEDS - EXPRO+ ( ISSUED)
25 17.1ET.12 INTERFERENCE DETECTION, CLASSIFICATION AND CANCELLATION FROM SPACE - EXPRO+ ( ISSUED)
26 17.1ET.14 MINIATURISATION OF THE DEEP SPACE TRANSPONDER - EXPRO+ ( COMPLETED)
27 17.1ET.15 VERY HIGH DATA RATE RECEIVER FOR THE EARTH-SPACE LINK IN THE 22 GHZ FREQUENCY FOR FUTURE MOON EXPLORATION MISSIONS - EXPRO PLUS ( ISSUED)
28 18.1ET.01 RFI DETECTION AND MITIGATION TECHNIQUES FOR EO PASSIVE MISSIONS - EXPRO PLUS ( INTENDED)
29 18.1ET.05 BLIND GNSS SOFTWARE RECEIVER TOOL FOR FIELD TEST ASSESSMENT IN HARSH ENVIRONMENTS - EXPRO PLUS ( ISSUED)
30 18.1ET.06 ADVANCED GLASS CELL TECHNOLOGY FOR EXTENDED GNSS ATOMIC CLOCKS LIFETIME - EXPRO+ ( ISSUED)
31 18.1ET.07 HIGH POWER KA-BAND FERRITE SWITCH - EXPRO+ ( ISSUED)
32 18.1ET.08 ADVANCED OPEN-LOOP TECHNIQUES FOR HIGH-SENSITIVITY GNSS RECEIVERS APPLIED TO BOC SIGNALS - EXPRO+ ( INTENDED)
33 18.1ET.09 TEST METHODOLOGY INVESTIGATIONS AND PARAMETERS INFLUENCING PASSIVE INTERMODULATION (PIM) INTERFERENCE ( INTENDED)
34 18.1ET.10 UNDERSTANDING AND MODELLING THE TEMPORAL COMPONENT OF THE INTENSITY AND PHASE OF RADAR SIGNALS OVER LAND AND SEA - EXPRO+ ( ISSUED)
35 18.1ET.11 MINIATURIZED TERMINAL FOR MASSIVE UNCOORDINATED SATELLITE ACCESS NETWORKS - EXPRO+ ( INTENDED)
36 18.1ET.12 MULTIPLE RF APERTURES BASED ON REFLECTARRAY ANTENNAS FOR HIGH RESOLUTION SAR INSTRUMENT - EXPRO+ ( INTENDED)
37 18.1ET.13 NAVIGATION AND GNSS IN SMART CITIES: TESTBED CONCEPT DEFINITION - EXPRO+ ( ISSUED)
38 18.1QC.02 MATERIALS FOR ANTIMICROBIAL / ANTIFUNGAL SURFACE TREATMENT IN CONFINED INHABITED ENVIRONMENT IN HUMAN SPACEFLIGHT - EXPRO PLUS ( INTENDED)
39 18.1QC.03 ISS 3D PRINTER SUITABLE FOR LARGE PART PRODUCTION USING HIGH STRENGTH AND FUNCTIONAL THERMOPLASTICS -EXPRO PLUS ( INTENDED)
40 18.1QC.04 MATERIALS SELECTION FOR SURFACE EVA SUIT DEVELOPMENT - EXPRO+ ( ISSUED)
41 18.1QC.05 SMALL, INFLATABLE, HIGH PRESSURE COMPOSITE TANKS FOR HUMAN SPACEFLIGHT ( INTENDED)
42 18.1QC.06 RADIATION CHARACTERISATION OF EEE COMPONENTS FOR ESA SPACE APPLICATIONS - EXPRO+ ( INTENDED)
43 16.1QM.04 CONTAMINATION REPELLENT COATINGS (PTRP) - EXPRO PLUS ( INTENDED)
44 16.1QM.07 PARTICLE MODELLING INSIDE FAIRINGS DURING PRE-LAUNCH AND LAUNCH) - EXPRO PLUS ( INTENDED)
45 17.112.03 NAVIGATION CONCEPTS FOR MULTI-REVOLUTION SEP TRANSFERS - T710-501GF - EXPRO+ ( EVALUATION)
46 17.112.04 GNSS SPACE SERVICE VOLUME EXTENSION - NEW POD CONCEPTS - T710-504GN - EXPRO+ ( INTENDED)
47 17.112.05 UNCERTAINTY PROPAGATION MEETING SPACE DEBRIS NEEDS - T711-501GR - EXPRO+ ( INTENDED)
48 18.112.03 TRP T711-504GR PROBABILISTIC ASSESSMENT OF RE-ENTRY BREAK-UP ANALYSES AND DERIVED QUANTITIES EXPRO+ ( ISSUED)
49 18.112.08 EXTENSION OF THE HIGH-FIDELITY RE-ENTRY BREAK-UP SIMULATION SOFTWARE BASED ON NEW MEASUREMENT TYPES -T711-503GR EXPRO+ ( INTENDED)
50 18.112.10 PHOTON-COUNTING SWIR 2D DETECTOR ARRAY - T712-404GS ( INTENDED)
51 18.112.11 MULTIPLE SPACECRAFT PER APERTURE WITH CODE DIVISION MULTIPLE ACCESS MODULATION AND LINEARISER - T712-501GS ( INTENDED)
52 18.117.07 T312-501GS - RE-DESIGN OF THE ESA DEEP SPACE ANTENNAS FEED SYSTEM TO SUPPORT FUTURE MOON MISSIONS EXPRO+ ( ISSUED)
53 13.123.01 EXPERT PFA ON GENERAL HYPERSONIC FLUID DYNAMICS (PTRP) ( INTENDED)
54 13.123.07 DEVELOPMENT OF A DEVICE TO AVOID TRANSFER ( INTENDED)
55 14.123.05 ASSESSMENT OF CARBON ION ENGINE TECHNOLOGY TARGETING COMPETITIVELY IMPROVEMENT OF ELECTRIC PROPULSION FOR TELECOMS APPLICATIONS - RE-ISSUE ( INITIATED)
56 18.123.04 STRUCTURAL TANKING - EXPRO PLUS ( INTENDED)
57 18.127.01 COMPACT AND IN-PLANE OPENING LOUVER WITH VARIABLE THERMO-OPTICAL PROPERTIES - EXPRO PLUS ( ISSUED)
58 18.127.02 PULSATING HEAT PIPES - EXPRO PLUS ( ISSUED)
59 18.127.03 NEW GENERATION COLD FINGERS FOR STIRLING CYCLE CRYOCOOLERS - EXPRO PLUS ( INTENDED)
60 12.129.11 AVIONICS AND MECHATRONICS PLATFORM FOR INTERNAL ISS ROBOTICS APPLICATIONS (EXOSKELETON) ( INTENDED)
61 14.129.01 FIBER BASED OPTICAL FREQUENCY COMB AT 2 MICRON FOR LIDAR APPLICATIONS ( INITIATED)
62 16.129.02 LARGE AREA HIGH-PERFORMANCE OPTICAL FILTER FOR X-RAY INSTRUMENTATION (PTRP) ( INTENDED)
63 18.129.01 MONITORING AND COUNTERMEASURES OF SPINE LENGTH VARIATIONS AND ASSOCIATED BACK PAIN - EXPRO PLUS ( INTENDED)
64 18.129.04 HOLLOW CORE FIBRE GAS CELL FOR LASER FREQUENCY STABILISATION (I2 AND C2HD) ( INTENDED)
65 18.129.05 SMART SLIT FOR NEXT GENERATION HIGH RESOLUTION SPECTROMETERS ( ISSUED)
66 18.129.06 NOVEL EXERCISE HARDWARE FOR EXPLORATION ( ISSUED)
67 18.129.07 CHARACTERISATION OF CONTAMINATION INDUCED STRAYLIGHT (PTRP) ( INTENDED)
68 18.129.08 CREW LECTERN FOR EASY ADMINISTRATION OF ROBOTS (CLEAR) - EXPRO PLUS ( INTENDED)
69 18.129.09 COMPACT SMALL SCALE CONVECTION LOOP FOR THE ISS EXPERIMENT CONTAINER AS PART OF THERMAL PLATFORM ( INTENDED)
70 18.129.11 MINI FLUORESCENCE MICROSCOPE (MFM) - EXPRO PLUS ( ISSUED)
71 18.129.12 CONCEPTS FOR THE IN-ORBIT CHARACTERISATION OF THE INSTRUMENT SPECTRAL RESPONSE FUNCTION - EXPRO PLUS ( INTENDED)
72 18.129.14 HYBRID, GRATING-MOT + MAGNETIC CHIP TRAP, APPROACH TO COMPACT HIGH FREQUENCY BEC PRODUCTION IN SPACE - EXPRO PLUS ( INTENDED)
73 18.129.15 ANORGANIC JOINING OF OPTICAL COMPONENTS TO CTE-MATCHED SUBSTRATE MATERIALS - EXPRO PLUS ( INTENDED)
74 18.129.16 ASTRONAUT HEALTH ENHANCEMENT INTEGRATED COUNTERMEASURE (ATHLETIC) ( INTENDED)
75 15.132.03 CONFIGURATION DATABASE NEED FOR MODELING & SIMULATION - EXPRO PLUS ( ISSUED)
76 18.132.03 MODEL EXCHANGE FOR SOFTWARE ENGINEERING - EXPRO PLUS ( ISSUED)
77 18.132.04 ADVANCED TEST MANAGEMENT SYSTEM ( ISSUED)
78 18.133.02 IMPACT-SAFE TANK PRESSURE LEVEL - EXPRO PLUS ( ISSUED)
79 18.133.03 DEVELOPMENT OF A NEW ELECTROLESS PLATING TECHNIQUE - EXPRO PLUS ( ISSUED)
80 18.133.04 CONTACTLESS MICRO-SWITCH BREADBOARD DEVELOPMENT - EXPRO PLUS ( ISSUED)
81 18.133.05 ACCEPTANCE AND VERIFICATION CRITERIA OF AM COMPONENTS ( ISSUED)
82 18.133.06 ADDITIVE MANUFACTURED FITTINGS AND INSERTS JOINING TO STRUCTURAL PARTS - EXPRO PLUS ( INTENDED)
83 18.133.07 ADVANCED ALUMINUM FITTINGS IN CARBON FIBRE REINFORCED PLASTIC - EXPRO PLUS ( INTENDED)
84 18.133.08 THIN-PLY-LAMINATE COMPOSITE STRUCTURES - EXPRO PLUS ( INTENDED)
85 18.133.09 IMPROVEMENT OF MICROVIBRATION PREDICTION AND VERIFICATION METHODS - EXPRO PLUS ( INTENDED)
86 18.133.10 METALLIC GLASSES FOR HIGH PERFORMANCE MECHANISM APPLICATIONS ON LONG TERM MISSIONS - EXPRO PLUS ( INTENDED)
87 18.133.11 LAUNCH SOUND LEVEL REDUCTION - EXPRO PLUS ( INTENDED)
88 18.133.12 STRESS RUPTURE PREVENTION OF COMPOSITE HIGH PRESSURE VESSELS ( ISSUED)
89 18.133.13 LARGE DEPLOYABLE REFLECTOR FOR IOD PREPARATION ( INTENDED)
90 14.135.01 2014 AO FOR THE INNOVATION TRIANGLE INITIATIVE(ITI) ( INTENDED)
91 15.136.01 AO FOR THE INNOVATION TRIANGLE INITIATIVE(ITI) ( ISSUED)
92 18.138.01 RE-ENTRY BREAK-UP EXPERIMENT ASSESSMENT - EXPRO PLUS ( ISSUED)
93 18.138.05 OPEN CONCURRENT DESIGN TOOL - MAINTENANCE AND EVOLUTION (OCDT-M+E) - EXPRO PLUS ( INTENDED)
94 09.155.08 VLWIR DETECTOR BREADBOARDING FOR AN INFRARED LIMB SOUNDER ( INTENDED)
95 15.164.03 MREP 2 - PHOOTPRINT THRUSTER PLUME AND SURFACE INTERACTION TESTING FACILITY DEVELOPMENT AND THRUSTER CHARACTERIZATION ( INTENDED)